Pro Advanced 48 x 48 waterproofing Custom tiled Shower Kit ABS PVC
A complete, easy to install WATERPROOFING SYSTEM Kit for maintenance-free tiled showers
With amazing grate cover choices and screwless design
Available in your choice of ABS or PVC drain connection
Pro Advanced Custom Tiled Shower Kit 48 x 48 with Center Drain
- All the components required to build a fully bonded water tight assembly for tiled showers.
- Includes the highest quality, most innovative and attractive drain system on the market.
- Protects wall cavities against water and vapor penetrations.
- Prefabricated sloped pan eliminates mortar bed, reducing weight and installation time.
- System can use modified thinset for better adhesion and elimination of failure possibilities.
- Install glass tiles with this system where unmodified thinset systems don't allow these materials.
- Membrane tested at 0.07 PERM rating - much lower than required for steam showers!
The videos above provide an excellent general guideline for installation. The 32 x 60 installation video shows the general installation techniques for installing a 32 x 60 kit (video example shows offset installation, but principles are identical). The curb installation in the video shows general installation tips for installing optional curb sections. You may build your own curbs and follow the same general guidelines for waterproofing as shown in the video. Some actual steps may vary or additional steps may be required depending on your specific kit.
The Pro Advanced Custom Shower Kit package includes:
- 1 Shower Tray, 48" x 48" (pan) with center drain
- Total of 108 SF of Waterproofing Membrane (approx. 39.5" wide x 32' 8" long)
- 1 - 33' x 5" Waterproofing Joint Strip
- 1 Pro Advanced Drain in ABS or PVC with selection from 10 stunning grate cover choices
- 1 Grate Puller (Grate is screwless!) and 1 easily accessed integrated hair trap
- 4 Pre-formed Inside corners
- 1 Tube of waterproofing sealant for failsafe membrane to drain-flange bond
- When Optional Curb is Chosen, Includes 2 Preformed Outside Corners.
Grates:
- Grate size: 3 3/4" x 3 3/4"
- Comes with grate puller to easily lift grate
- Features screw-less design and accommodates integrated hair trap
Polished Chrome
Bright Brass
Black Chrome
Brushed Nickel
Antique Pewter
Polished Copper
Oil Rubbed Bronze
Brushed Bronze
Polished Nickel
Satin NickelOptional Curbs:
| Optional Curb Overlays: (ships in 2 sections) |
 |
Noble Curb Overlays (over 2 by 4s) |
| Optional 4' Solid Curb: |  |
Pro Solid Shower Curb 4' |
Installation
1. Mark Drain Location
2. Cut Drain Hole
3. Test Fit
4. Lay Sections
5. Complete Pan
6. Glue Drain Flange
7. Set Inside Corners
8. Install Transistion Strip
9. Install Wall Membrane
10. Install Floor WP
11. Waterproof Curb
12. Install Outside Corner
13. Expose Drain
14. Seal Drain Flange
15. Set Grate Riser
16. Adjust Flange Subfloor
17. Lock Into Place
18. Ready for Tile!Complete your installation by adding these to your order:
| Extremely Stain Resistant, Permanently Sealed, Easy to Install: |  |
TEC Power Grout - Ultimate Performance Grout |
| Protect your existing tile and other hard surfaces with: |  |
Shield Advanced Antimicrobial Complete System |
Previous Posts
Schluter Systems 48 x 48 Inch Kerdi Shower Kit
Schluter Kerdi Waterproofing Shower System 323 Square Foot Roll
Dural Durabase WP Waterproofing Seam Strips 5 Inch 16.5 Foot Roll
Dural Durabase WP Waterproofing Seam Strips 10 Inch 33 Foot Roll
Pro 48 inch Shower Pan for Shower Systems
Dural Duralis Listello Deco Dorado Anodized Aluminum Profiles
Pro Advanced Custom Tile Mud Kit 72x72 Center or Offset in ABS or PVC
Schluter Systems Kerdi 3/4 Inch Pipe Collar Seal
Schluter Systems Kerdi Shower Tray ST-81/152BR 32X60 Off Center Drain
Schluter Shower Systems Kerdi Shower Curb 48 Inch
Schluter Systems Kerdi Shower Ramp SR122
Pro Shower Drain Kit for Shower Systems ABS or PVC
Trowel for Installing Schluter Kerdi
Schluter Systems 72 x 72 Inch Kerdi Shower Kit
Schluter Kerdi Shower Tray 48x48 ST-122