Dural Duralis Listello Deco Brushed Stainless Steel Profiles
Duralis Ceramic Tiles Finishing Profiles
Straight-Edge tiling profile for wall and floor
Made in Germany
Height: 1" (25mm) or 1-9/16" (40mm)
Material:
Brushed (240 grain) Stainless Steel – available in gold and silver.
Edge is 1/4" thick. Please choose profile height from pull-down menu.
Application:
The DURALIS profiles by Dural are decorative strips that were developed for visual wall design. They provide individual aesthetic improvements to tiled areas within the home or work place. The profiles are available in widths of 10, 15, 20 or 25 mm for aluminum and 25 or 40 mm for stainless steel.
Material:
The DURALIS profiles of anodized aluminum are of special refinement and therefore the surface is usually not subject to changes.  The visible surfaces, however, must be protected against any cement materials. Scratching or abrasion can generate damage. The DURALIS profiles of stainless steel ("Star" with peel-off strip) are especially suitable for areas subjected to high stresses due to chemicals and acids. They meet the highest requirements of resistance to mechanical impact.  Stainless steel profiles are used in foodstuff industry, swimming pools, and in hospitals and breweries.
Properties:
DURALIS is intended for decorative use within the domestic and commercial areas. Damage by impact or scratching is unlikely within normal use.
Handling:
- Decide the width of the DURALIS profile required.
- Apply sufficient tile cement onto the wall above the upper line of tiles. Alternately:Â apply tile cement onto the rear of the DURALIS profile.
- Leaving a joint of 2-3 mm (5/64†– 1/8â€) between tiles and profile, press the DURALIS profile into the cement until both surfaces (tile and profile) are flush.
- Place the next line of tiles above the DURALIS profile.
- Leave a joint of 2-3 mm between tiles and profile.
- Completely fill the space between tiles and profile with joint grout.
Care and Maintenance:
DURALIS Profiles do not require any special care. Dirt deposits can be removed with the usual commercial cleaning materials. The cleaning materials must not contain hydrochloric acid or hydrofluoric acid and must not be abrasive.
Previous Posts
Schluter ECK-K Tile Wall Edge Protection Profiles
Schluter DILEX-HKW PVC Cove-Shaped Floor / Wall Transition Profiles
Schluter RONDEC Finishing / Edge Protection Profiles - PVC
Inside Corner for Schluter DILEX-AHK
Mark E Pre-Pitch Shower Sub Floor Slope Pitch Standard Kit
Schluter SCHIENE Tile Edge Protection Profiles
Schluter BARA-RTP Balcony Gutter System Edging Profiles
Mark E Handi Kirb Wheelchair Accessible Shower Curb
Dural Duralis Listello Deco Titanium Anodized Aluminum Profiles
Dural Durosol Square Edge Profile Aluminum Beige Powder Coated
Connector for Schluter BARA-RTP
Dural Durabord Round Edge Profile PVC Granite Beige High Gloss
Dural Durabord Round Edge Profile PVC Marble Black High Gloss
End Cap for Schluter DILEX-HKW