Mark E Quick-Pitch Shower Floor Standard Kit -- 6 Standard 36" Float Sticks and Center Ring
- The Quick Pitch Float Stick System for easy construction of shower floors
- Eliminates the need for measurements or levels to achieve a properly sloped shower floor
- Includes 6 Standard Float Sticks, 1 Standard Center Ring
Mark E Quick-Pitch Shower Floor Standard Kit
Quick Pitch is a revolutionary product that simplifies mortar bed installation. In order to install a proper shower floor, the base of the shower has to have a proper slope for drainage. With Quick Pitch, this is easily accomplished.
The Standard Kit permits construction of standard 36" x 60" shower areas with a centered drain, as well as or custom shower areas where the drain is within 36" of each wall. This system does not add to the pan liner pre-slope, as the Center Ring sits on top of the drain flange bolts.
The Quick Pitch Float Stick System permits easy construction of shower floors with the proper minimum water drainage slope of 1/4" per 12" run. With this time-saving system, there is now no chance for an error in measurement and no need for a level to achieve a properly sloped shower floor. The Quick Pitch Float Stick System uses a Center Ring and tapered Float Sticks to assure the correct drainage slope in standard or custom shower areas with walls up to 6' in any direction from the floor drain.
Custom Shower Floor Construction
The Quick Pitch Float Stick System is available in component form for custom shower applications. The three components include:
- QPCR-104 Quick Pitch Center Ring (35/8" inside diameter x 1" high)
- XFS-101-2 Quick Pitch Standard Float Sticks (1" to 13/4" taper x 36" long)
- EFS-103 Quick Pitch Extended Float Sticks (13/4" to 21/2" taper x 36" long)
Standard Shower Floor Construction
The No. QPK-101 Quick Pitch Standard Kit permits construction of standard 36" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. Included in each package is one each Center Ring and 6 each Standard Float Sticks (1" to 13/4" taper x 36" long) that attach in any of the 24 slots on the Center Ring.
Previous Posts
Dural Durosol 5 mil Square Edge Profile Brass Chrome Plated
Outside Corner for Schluter RONDEC - Stainless Steel
Schluter DITRA-HEAT-E-RS Non-Programmable Thermostat
Schluter DILEX-HK PVC / CPE Cove-Shaped Corner Profiles
Schluter TREP-FL Decorative Stainless Steel Stair-Nosing Profiles
Schluter TREP-SE Without Thermoplastic Rubber Insert
Inside Corner for Schluter RONDEC - Stainless Steel Appearance
Schluter DILEX-BT Expansion Movement Joint Profiles
Dural Durosol Square Edge Profile Stainless Steel Grade 304 V2A Matte
Outside Corner for Schluter BARA-RK
Outside Corner for Schluter BARA-RAK
Connector for Schluter DILEX-AHK
Dural Durosol Square Edge Profile Aluminum White Powder Coated
Durondell Closed Quarter Round Outside Corners Powder Coated Aluminum
Schluter RONDEC Finishing / Edge Protection Profiles - Stainless Steel