Schluter RONDEC Finishing / Edge Protection Profiles - Anodized / Color-coated Aluminum version
- Forms a symmetrically rounded corner along the tile surface edge.
- 2.5 m (8 2-1/2") profile length; For tile 6 mm - 12.5 mm (1/4" - 1/2") thick.
- Multiple accessories available (corners, connectors); Made of aluminum.
You are viewing the Aluminum version of the profile. Other materials are available:
Application and Function
Schluter-RONDEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge.
The profile is available in stainless steel, solid brass, chrome-plated solid brass, color-coated aluminum, anodized aluminum, Tuscan color-coated aluminum and PVC. Schluter-RONDEC's wide range of materials, colors, and surface finishes allows for color coordination with tile and grout and the creation of interesting accents in decorative designs.
In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. Schluter-RONDEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or transition profile.
In addition Schluter-RONDEC is also suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coverings. The integrated joint spacer forms a defined joint cavity with the tile.
Note: Schluter-RONDEC, in stainless steel, does not feature the integrated joint spacer. Matching inside and outside corners, including sink corners, and connectors are available.
Available Sizes and Materials
Note: Certain accessories aren't available for certain sizes and finishes.
Installation
- Select Schluter-RONDEC according to tile thickness.
- Using a notched trowel, apply thin-set mortar to the area where profile is to be placed. If Schluter-RONDEC is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.
- Press the perforated anchoring leg of profile into the mortar and align.
- Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32 (1 mm) lower.
- Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel profiles, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm).
- Fill the joint completely with grout or setting material.
- Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials and grouts must be removed immediately, especially from anodized aluminum surfaces.
Material
Schluter-RONDEC is available in solid brass, chrome-plated brass, anodized aluminum, color-coated aluminum, stainless steel, and PVC.
Schluter-RONDEC, in anodized aluminum, features an anodized layer that retains a uniform appearance during normal use. The surface, however, is susceptible to scratching and wear and may be damaged by grout or setting material. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation). Therefore, it is important to remove mortar or grout residue immediately from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water.
Schluter-RONDEC, in color-coated aluminum, is pretreated (chromated) aluminum that is color-coated with a polyurethane powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Protect the profile against abrasion or scratching.
Maintenance
Schluter-RONDEC requires no special maintenance or care and is resistant to mold and fungi. Clean the profile using common household cleaning agents.
In the case of chrome-plated brass, anodized aluminum and color-coated aluminum do not use abrasive cleaning agents.
Previous Posts
Mark E StringA-Level Wall Tile Installation Bubble Level Kits
Outside Corner for Schluter RONDEC - PVC
Dural Durondell Closed Qtr Rnd Beige Powder Coated Aluminum
Dural Durosol 5 mil Square Edge Profile Brass High Gloss
Dural Durabase CI Plus Plus Ceramic Tile Underlayment 323 SF Roll
Schluter TREP-E Anti-Slip Stainless Steel Stair Nosing Profiles
Schluter DILEX-KSBT Expansion Joint Movement Profiles
Dural Durondell Closed Qtr Rnd Silver Gray Powder Coated Aluminum
Schluter Ditra Heat 240V Heating Cables
Schluter DILEX-BTO Expansion Movement Joint Profiles
Dural Duralis Listello Deco Champagne Anodized Aluminum Profiles
Inside Corner for Schluter BARA-RTK
Mark E Kirb-Perfect Shower Curb Custom Size Form Kit
Dural Durabord Round Edge Profile PVC Granite Gray High Gloss
Schluter Ditra Heat 120V Heating Cables